Blade_Etchings click for details
Blade Etching is electro-chemical metal etching process which uses acid and a controlled electric current through a blade etching master to mark knife blades with a design or logo. A Custom Blade Etching Master is required for logos. Process is permanent.

Custom_Master_Setup click for details
Custom Master Set-up is a one time $50.00 custom engraving master is required to duplicate your logo. Electronic art to art@KnivesAndFlashlights.com. Master can be used for Laser, Rotary, or Diamond. (No master required for straight line text)

Diamond_Engravings click for details
Diamond Engraving is used only on metal surfaces such as stainless steel, nickel-silver and brass. The process uses a diamond-tip cutter to mark the metal surfaces, allowing the bright metal to show through.

Epoxy_Pad_Printing click for details
Epoxy Pad Printing is the most economical way to imprint smooth plastic handled knives or plastic display box tops. 50 piece minimum.

Laser_Engravings click for details
Laser Engraving is used to mark into wood surfaces, metal handles, leather knife sheaths and flashlights. This process uses an intense light beam to permanently replicate your name or logo. No set-up for straight line text. Custom Logos $50.00 (G) each.

Rotary_Engraving click for details
Rotary Engraving is used only on Swiss Army knife handles and cannot be used on metal. The process uses a .005" to .020" wide cutter rotating at 10,000 RPM and cuts with a slight slant or taper and white colorfill.

Rotary_Engravings click for details
Rotary Engraving is used only on Swiss Army knife handles and cannot be used on metal. The process uses a .005" to .020" wide cutter rotating at 10,000 RPM and cuts with a slight slant or taper and white colorfill.