|
Examples
 Custom Master Set-up - Custom Logos make a unique statement. A one time $80.00 custom engraving master is required to duplicate your logo. Electronic custom engraving masters can be used with any of our 3 engraving processes, Laser, Rotary, or Diamond. The larger the artwork, the better the replication. Send electronic art to art@KnivesAndFlashlights.com. (No master required for straight line text)
 Blade Etching - The HARD HAT electro-acid metal etching process uses acid and a controlled electrical current through an etching master to "mark" knife blades with a design or logo. All metal etches are black. A Custom Blade Etching Master is required for logos. Process is permanent.
 Diamond Engraving - Diamond Engraving is used only on metal surfaces such as stainless steel, nickel-silver and brass. The process uses a diamond-tip cutter to mark the metal surfaces, allowing the bright metal to show through. A Custom Master Setup is required for logos.
 Epoxy Pad Printing - Epoxy Pad Printing is the most economical way to imprint smooth plastic handled knives or plastic display box tops. 50 piece minimum. We use long lasting Duratech epoxy with specially formulated hardeners for durability. A Custom Master Setup is required for logos.
 Laser Engraving - Laser Engraving is used to mark into wood surfaces, metal handles, leather knife sheaths and flashlights. This process uses an intense light beam to permanently replicate your name or logo within an accuracy of 1/600th of an inch. No set-up for straight line text. A Custom Master Setup is required for logos.
 Rotary Engraving - Rotary Engraving is used only on Swiss Army knife handles and cannot be used on metal. The process uses a .005" to .020" wide cutter rotating at 10,000 RPM and cuts with a slight slant or taper and white colorfill. Free color-fill minimizes this slant while highlighting and enhancing the apprearance.
|
